149 citations as recorded by crossref.

1. Spatial and temporal variations in rockfall determined from TLS measurements in a deglaciated valley, Switzerland J. Strunden et al. 10.1002/2014JF003274
2. A critical review of rock slope failure mechanisms: The importance of structural geology D. Stead & A. Wolter 10.1016/j.jsg.2015.02.002
3. A study of rock mass properties based on discrete fracture network modeling and compression damage process M. Li et al. 10.1007/s10064-024-03898-1
4. Stability analysis of deep-buried hard rock underground laboratories based on stereophotogrammetry and discontinuity identification J. Huang et al. 10.1007/s10064-019-01461-x
5. OCFMD: An Automatic Optimal Clustering Method of Discontinuity Orientation Based on Fisher Mixed Distribution K. Zhang et al. 10.1007/s00603-023-03587-7
6. Remote Sensing Proxies for Deforestation and Soil Degradation in Landslide Mapping: A Review A. Miller 10.1111/gec3.12050
7. Analysis of SLAM-Based Lidar Data Quality Metrics for Geotechnical Underground Monitoring L. Fahle et al. 10.1007/s42461-022-00664-3
8. The Effect of Geometrical Features of Release Surfaces on the Stability of Tectonically Disturbed Deep Rock Slopes in an Albite Open Pit Mine T. Kadakci Koca 10.3390/su15021425
9. Characterization of high and steep slopes and 3D rockfall statistical kinematic analysis for Kangyuqu area, China W. Zhang et al. 10.1016/j.enggeo.2022.106807
10. Landslide dam and subsequent dam-break flood estimation using HEC-RAS model in Northern Pakistan M. Butt et al. 10.1007/s11069-012-0361-8
11. Close-range terrestrial digital photogrammetry and terrestrial laser scanning for discontinuity characterization on rock cuts M. Sturzenegger & D. Stead 10.1016/j.enggeo.2009.03.004
12. Reply to the discussion by Olsen and Stuedlein on “Use of terrestrial laser scanning for the characterization of retrogressive landslides in sensitive clay and rotational landslides in river banks”Appears in Canadian Geotechnical Journal, 47(10): 1164–1168. T. Oppikofer et al. 10.1139/T10-068
13. 3D modelling of the ancient underground quarries of the famous Parian marble in the Aegean Sea, Greece and assessment of their stability using LiDAR scanning V. Marinos et al. 10.1144/qjegh2017-145
14. An integrated remote sensing-GIS approach for the analysis of an open pit in the Carrara marble district, Italy: Slope stability assessment through kinematic and numerical methods M. Francioni et al. 10.1016/j.compgeo.2015.02.009
15. A combined field/remote sensing approach for characterizing landslide risk in coastal areas M. Francioni et al. 10.1016/j.jag.2017.12.016
16. Establishing relationships between structural data from close-range terrestrial digital photogrammetry and measurement while drilling data S. Manzoor et al. 10.1016/j.enggeo.2020.105480
17. Using an Unmanned Aerial Vehicle-Based Digital Imaging System to Derive a 3D Point Cloud for Landslide Scarp Recognition A. Al-Rawabdeh et al. 10.3390/rs8020095
18. Kinematic analysis of sea cliff stability using UAV photogrammetry J. Barlow et al. 10.1080/01431161.2016.1275061
19. LiDAR, UAV or compass-clinometer? Accuracy, coverage and the effects on structural models A. Cawood et al. 10.1016/j.jsg.2017.04.004
20. Digital outcrop modelling using “structure-from- motion” photogrammetry: Acquisition strategies, validation and interpretations to different sedimentary environments A. Bilmes et al. 10.1016/j.jsames.2019.102325
21. Magnitude–frequency relation for rockfall scars using a Terrestrial Laser Scanner D. Santana et al. 10.1016/j.enggeo.2012.07.001
22. Back Analysis of the 2014 San Leo Landslide Using Combined Terrestrial Laser Scanning and 3D Distinct Element Modelling M. Spreafico et al. 10.1007/s00603-015-0763-5
23. A multidisciplinary approach for the investigation of a rock spreading on an urban slope R. Tomás et al. 10.1007/s10346-017-0865-0
24. Automatic identification of discontinuities and refined modeling of rock blocks from 3D point cloud data of rock surfaces Y. Ji et al. 10.1016/j.jrmge.2024.04.039
25. 3-D geomechanical rock mass characterization for the evaluation of rockslide susceptibility scenarios G. Gigli et al. 10.1007/s10346-013-0424-2
26. The Use of Innovative Techniques for Management of High-Risk Coastal Areas, Mitigation of Earthquake-Triggered Landslide Risk and Responsible Coastal Development S. Mavroulis et al. 10.3390/app12042193
27. Quantitative geometric description of fracture systems in an andesite lava flow using terrestrial laser scanner data C. Massiot et al. 10.1016/j.jvolgeores.2017.05.036
28. The Palliser Rockslide, Canadian Rocky Mountains: Characterization and modeling of a stepped failure surface M. Sturzenegger & D. Stead 10.1016/j.geomorph.2011.09.001
29. Discontinuity spacing analysis in rock masses using 3D point clouds A. Riquelme et al. 10.1016/j.enggeo.2015.06.009
30. Review of Earth science research using terrestrial laser scanning J. Telling et al. 10.1016/j.earscirev.2017.04.007
31. Application of Unmanned Aerial Vehicle Data and Discrete Fracture Network Models for Improved Rockfall Simulations M. Francioni et al. 10.3390/rs12122053
32. Stability analysis of the 2007 Chehalis lake landslide based on long-range terrestrial photogrammetry and airborne LiDAR data M. Brideau et al. 10.1007/s10346-011-0286-4
33. Automatic identification and characterization of discontinuities in rock masses from 3D point clouds D. Kong et al. 10.1016/j.enggeo.2019.105442
34. Geostatistical method for inferring RMR ahead of tunnel face excavation using dynamically exposed geological information J. Chen et al. 10.1016/j.enggeo.2017.08.004
35. Dynamic response of the Chamousset rock column (Western Alps, France) C. Lévy et al. 10.1029/2009JF001606
36. Advances in the study of naturally fractured hydrocarbon reservoirs: a broad integrated interdisciplinary applied topic G. Spence et al. 10.1144/SP374.19
37. 3D Rock Structure Digital Characterization Using Airborne LiDAR and Unmanned Aerial Vehicle Techniques for Stability Analysis of a Blocky Rock Mass Slope Q. Xu et al. 10.3390/rs14133044
38. Spaceborne, UAV and ground-based remote sensing techniques for landslide mapping, monitoring and early warning N. Casagli et al. 10.1186/s40677-017-0073-1
39. Automatic extraction of discontinuity orientation from rock mass surface 3D point cloud J. Chen et al. 10.1016/j.cageo.2016.06.015
40. Comparing rockfall scar volumes and kinematically detachable rock masses O. Mavrouli & J. Corominas 10.1016/j.enggeo.2016.08.013
41. R-C-D-F machine learning method to measure for geological structures in 3D point cloud of rock tunnel face B. Alseid et al. 10.1016/j.tust.2024.106071
42. Validation of fracture data recognition in rock masses by automated plane detection in 3D point clouds T. Drews et al. 10.1016/j.ijrmms.2018.06.023
43. The use of an unmanned aerial vehicle for fracture mapping within a marble quarry (Carrara, Italy): photogrammetry and discrete fracture network modelling R. Salvini et al. 10.1080/19475705.2016.1199053
44. A Progressive Framework for Delineating Homogeneous Domains in Complicated Fractured Rock Masses: A Case Study from the Xulong Dam Site, China J. Zhan et al. 10.1007/s00603-019-01999-y
45. Bias Correction for View-limited Lidar Scanning of Rock Outcrops for Structural Characterization M. Lato et al. 10.1007/s00603-010-0086-5
46. Structural mapping of rock walls imaged with a LiDAR mounted on an unmanned aircraft system C. McAnuff et al. 10.1139/juvs-2018-0015
47. Outcrops as guides to subsurface natural fractures: Example from the Nikanassin Formation tight-gas sandstone, Grande Cache, Alberta foothills, Canada E. Ukar et al. 10.1016/j.marpetgeo.2019.01.039
48. A reinterpretation of the Downie Slide (British Columbia, Canada) based on slope damage characterization and subsurface data interpretation D. Donati et al. 10.1007/s10346-020-01601-5
49. A New Method for Automatic Extraction and Analysis of Discontinuities Based on TIN on Rock Mass Surfaces X. Wu et al. 10.3390/rs13152894
50. Measuring Carbonate Rock Strength using Spectroscopy across the Optical and Thermal Region D. Bakun-Mazor et al. 10.1088/1755-1315/833/1/012025
51. A new approach for semi-automatic rock mass joints recognition from 3D point clouds A. Riquelme et al. 10.1016/j.cageo.2014.03.014
52. Structural analysis of Turtle Mountain: origin and influence of fractures in the development of rock slope failures A. Pedrazzini et al. 10.1144/SP351.9
53. Influence of range measurement noise on roughness characterization of rock surfaces using terrestrial laser scanning K. Khoshelham et al. 10.1016/j.ijrmms.2011.09.007
54. Automatic Mapping of Discontinuity Persistence on Rock Masses Using 3D Point Clouds A. Riquelme et al. 10.1007/s00603-018-1519-9
55. Retreat rates, modalities and agents responsible for erosion along the coastal chalk cliffs of Upper Normandy: The contribution of terrestrial laser scanning P. Letortu et al. 10.1016/j.geomorph.2015.05.007
56. Weak foliated rock slope stability analysis with ultra-close-range terrestrial digital photogrammetry P. Alameda-Hernández et al. 10.1007/s10064-017-1119-z
57. Towards semi-automatic rock mass discontinuity orientation and set analysis from 3D point clouds J. Guo et al. 10.1016/j.cageo.2017.03.017
58. Integration of Terrestrial Laser Scanning and NURBS Modeling for the Deformation Monitoring of an Earth-Rock Dam H. Xu et al. 10.3390/s19010022
59. Taux d’ablation des falaises crayeuses haut-normandes : l’apport du scanner laser terrestre P. Letortu et al. 10.4000/geomorphologie.10872
60. Introduction to Vertical Geology thematic issue M. Jaboyedoff et al. 10.5721/EuJRS20154827
61. TSM—Tracing Surface Motion: A Generic Toolbox for Analyzing Ground-Based Image Time Series of Slope Deformation M. Desrues et al. 10.3390/rs11192189
62. Study on strength parameters of rock mass with stochastic combination discontinuities and their application in a tunnel in China J. Wei et al. 10.1177/1687814018782089
63. Semi-automatic extraction of rock mass structural data from high resolution LIDAR point clouds G. Gigli & N. Casagli 10.1016/j.ijrmms.2010.11.009
64. Characterization of rock slopes through slope mass rating using 3D point clouds A. Riquelme et al. 10.1016/j.ijrmms.2015.12.008
65. Probabilistic Analysis of Earthquake-induced Failure and Runout Behaviors of Rock Slopes with Discrete Fracture Network L. Xing et al. 10.1016/j.compgeo.2023.105487
66. The anatomy of an active slide: the Gascons rockslide, Québec, Canada C. Cloutier et al. 10.1007/s10346-015-0566-5
67. Terrestrial remote sensing-based estimation of mean trace length, trace intensity and block size/shape M. Sturzenegger et al. 10.1016/j.enggeo.2011.02.005
68. Structurally-controlled instability, damage and slope failure in a porphyry rock mass F. Agliardi et al. 10.1016/j.tecto.2013.05.033
69. Assessment of landslide occurrences in Serra do Mar mountain range using kinematic analyses R. Cerri et al. 10.1007/s12665-018-7508-1
70. 3D Thermal Monitoring of Jointed Rock Masses through Infrared Thermography and Photogrammetry G. Grechi et al. 10.3390/rs13050957
71. Improvements in the integration of remote sensing and rock slope modelling M. Francioni et al. 10.1007/s11069-017-3116-8
72. Evaluación de la estabilidad de taludes rocosos a partir de nubes de puntos 3D obtenidas con un vehículo aéreo no tripulado R. Tomás et al. 10.4995/raet.2020.13168
73. Exploiting a Semi-Automatic Point Cloud Segmentation Method to Improve the Quality of Rock-Mass Characterization. The Cima Grappa Conservative Restoration Case Study F. Mugnai et al. 10.3390/ijgi10050276
74. Application of 3D-DDA integrated with unmanned aerial vehicle–laser scanner (UAV-LS) photogrammetry for stability analysis of a blocky rock mass slope C. Liu et al. 10.1007/s10346-019-01196-6
75. Forensic Excavation of Rock Masses: A Technique to Investigate Discontinuity Persistence J. Shang et al. 10.1007/s00603-017-1290-3
76. A method for assessing and managing landslide residual hazard in urban areas W. Frodella et al. 10.1007/s10346-017-0875-y
77. Landslide Mapping and Characterization through Infrared Thermography (IRT): Suggestions for a Methodological Approach from Some Case Studies W. Frodella et al. 10.3390/rs9121281
78. Size Distribution for Potentially Unstable Rock Masses and In Situ Rock Blocks Using LIDAR-Generated Digital Elevation Models O. Mavrouli et al. 10.1007/s00603-014-0647-0
79. Terrestrial Photogrammetry and Numerical Modelling for the Stability Analysis of Rock Slopes in High Mountain Areas: Aiguilles Marbrées case M. Curtaz et al. 10.1007/s00603-013-0446-z
80. Determination of statistical discontinuity persistence for a rock mass characterized by non-persistent fractures W. Zhang et al. 10.1016/j.ijrmms.2019.104177
81. Shipborne Mobile Photogrammetry for 3D Mapping and Landslide Detection of the Water-Level Fluctuation Zone in the Three Gorges Reservoir Area, China D. Jin et al. 10.3390/rs13051007
82. Predicting Mechanical Properties of Carbonate Rocks Using Spectroscopy Across 0.4–12 μm D. Bakun-Mazor et al. 10.1007/s00603-024-04035-w
83. Control of natural fractures in historical quarries via 3D point cloud analysis A. Riquelme et al. 10.1016/j.enggeo.2022.106618
84. Automated rockmass discontinuity mapping from 3-dimensional surface data M. Vöge et al. 10.1016/j.enggeo.2013.07.008
85. Combining InfraRed Thermography and UAV Digital Photogrammetry for the Protection and Conservation of Rupestrian Cultural Heritage Sites in Georgia: A Methodological Application W. Frodella et al. 10.3390/rs12050892
86. Laser scanning of fine scale pattern along a hydrological gradient in a peatland ecosystem K. Anderson et al. 10.1007/s10980-009-9408-y
87. Cross‐strata palaeocurrent analysis using virtual outcrops B. Freitas et al. 10.1111/sed.12855
88. Technical Note: Use of remote sensing for landslide studies in Europe V. Tofani et al. 10.5194/nhess-13-299-2013
89. Geological discontinuity persistence: Implications and quantification J. Shang et al. 10.1016/j.enggeo.2018.05.010
90. Surface and subsurface non-invasive investigations to improve the characterization of a fractured rock mass L. Longoni et al. 10.1088/1742-2132/9/5/461
91. Application of Remote Sensing Data for Evaluation of Rockfall Potential within a Quarry Slope C. Robiati et al. 10.3390/ijgi8090367
92. Integration of Lidar-Based Structural Input and Discrete Fracture Network Generation for Underground Applications I. Vazaios et al. 10.1007/s10706-017-0240-x
93. Landslide detection, monitoring and prediction with remote-sensing techniques N. Casagli et al. 10.1038/s43017-022-00373-x
94. Evaluating roadside rockmasses for rockfall hazards using LiDAR data: optimizing data collection and processing protocols M. Lato et al. 10.1007/s11069-011-9872-y
95. Automated mapping of rock discontinuities in 3D lidar and photogrammetry models M. Lato & M. Vöge 10.1016/j.ijrmms.2012.06.003
96. Three-dimensional slope stability analysis of South Peak, Crowsnest Pass, Alberta, Canada M. Brideau et al. 10.1007/s10346-010-0242-8
97. DEM Simulation of the Evolution of an Unstable Rock Face: A Modelling Procedure for Back Analysis of Rockslides F. Calvetti et al. 10.1007/s00603-018-1576-0
98. Deformation characteristics and multi-slab formation of a deep-seated rock slide in a high alpine environment (Bliggspitze, Austria) C. Zangerl et al. 10.1007/s10064-019-01516-z
99. Fracture characterization based on data fusion technology and its application in rockfall hazard assessment P. Ye et al. 10.1007/s12665-024-11517-1
100. Comparison of airborne laser scanning, terrestrial laser scanning, and terrestrial photogrammetry for mapping differential slope change in mountainous terrain M. Lato et al. 10.1139/cgj-2014-0051
101. Image-based correlation of Laser Scanning point cloud time series for landslide monitoring J. Travelletti et al. 10.1016/j.jag.2014.03.022
102. Comparison of digital outcrop and conventional data collection approaches for the characterization of naturally fractured reservoir analogues T. Seers & D. Hodgetts 10.1144/SP374.13
103. Terrestrial laser scanning for rockfall stability analysis in the cultural heritage site of Pitigliano (Italy) R. Fanti et al. 10.1007/s10346-012-0329-5
104. Terrestrial Remote Sensing techniques to complement conventional geomechanical surveys for the assessment of landslide hazard: The San Leo case study (Italy) M. Spreafico et al. 10.5721/EuJRS20154835
105. Characterization of the 3‐D fracture setting of an unstable rock mass: From surface and seismic investigations to numerical modeling C. Colombero et al. 10.1002/2017JB014111
106. Examining high-resolution survey methods for monitoring cliff erosion at an operational scale P. Letortu et al. 10.1080/15481603.2017.1408931
107. Using Telephoto Lens to Characterize Rock Surface Roughness in SfM Models R. García-Luna et al. 10.1007/s00603-021-02373-7
108. A state-of-the-art review of automated extraction of rock mass discontinuity characteristics using three-dimensional surface models R. Battulwar et al. 10.1016/j.jrmge.2021.01.008
109. A case study integrating remote sensing and distinct element analysis to quarry slope stability assessment in the Monte Altissimo area, Italy M. Francioni et al. 10.1016/j.enggeo.2014.09.003
110. Comparing fracture statistics from outcrop and reservoir data using conventional manual and t-LiDAR derived scanlines in Ca2 carbonates from the Southern Permian Basin, Germany I. Becker et al. 10.1016/j.marpetgeo.2018.04.021
111. Development of an elliptical fitting algorithm to improve change detection capabilities with applications for deformation monitoring in circular tunnels and shafts G. Walton et al. 10.1016/j.tust.2014.05.014
112. Engineering geological characterization and assessment of complex rock slope failures in Mudurnu, Turkey A. Arslan Kelam et al. 10.1007/s11069-023-06331-0
113. Geomechanical Characterization of a Rock Cliff Hosting a Cultural Heritage through Ground and UAV Rock Mass Surveys for Its Sustainable Fruition S. Mineo et al. 10.3390/su13020924
114. MATLAB Virtual Toolbox for Retrospective Rockfall Source Detection and Volume Estimation Using 3D Point Clouds: A Case Study of a Subalpine Molasse Cliff D. Carrea et al. 10.3390/geosciences11020075
115. Application of Remote Sensing to the Investigation of Rock Slopes: Experience Gained and Lessons Learned D. Stead et al. 10.3390/ijgi8070296
116. A Combined Remote Sensing–Numerical Modelling Approach to the Stability Analysis of Delabole Slate Quarry, Cornwall, UK M. Havaej et al. 10.1007/s00603-015-0805-z
117. Quantitative analysis of folds by means of orthorectified photogrammetric 3D models: a case study from Mt. Catria, Northern Apennines, Italy A. Corradetti et al. 10.1111/phor.12212
118. Effects of confinement on rock mass modulus: A synthetic rock mass modelling (SRM) study I. Vazaios et al. 10.1016/j.jrmge.2018.01.002
119. Develop of New Tools for 4D Monitoring: Case Study of Cliff in Apulia Region (Italy) D. Costantino et al. 10.3390/rs13091857
120. OCM: an intelligent recognition method of rock discontinuity based on optimal color mapping of 3D Point cloud via deep learning K. Zhang et al. 10.1007/s00603-024-03804-x
121. Integrating diverse geologic and geodetic observations to determine failure mechanisms and deformation rates across a large bedrock landslide complex: the Osmundneset landslide, Sogn og Fjordane, Norway A. Booth et al. 10.1007/s10346-014-0504-y
122. Assessment of tectonic-controlled rock fall processes threatening the ancient Appia route at the Aurunci Mountain pass (central Italy) E. Di Luzio et al. 10.1007/s11069-020-03939-4
123. Integrating geomechanical surveys and remote sensing for sea cliff slope stability analysis: the Mt. Pucci case study (Italy) S. Martino & P. Mazzanti 10.5194/nhess-14-831-2014
124. A modified method of discontinuity trace mapping using three-dimensional point clouds of rock mass surfaces K. Zhang et al. 10.1016/j.jrmge.2019.10.006
125. Automated rapid mapping of joint orientations with mobile LiDAR M. Gallant & J. Marshall 10.1016/j.ijrmms.2016.09.014
126. Machine Learning-Based Rockfalls Detection with 3D Point Clouds, Example in the Montserrat Massif (Spain) L. Blanco et al. 10.3390/rs14174306
127. Fracture characterization in Upper Permian carbonates in Spitsbergen: A workflow from digital outcrop to geo-model K. Larssen et al. 10.1016/j.marpetgeo.2020.104703
128. Geological 3D modeling for excavation activity in an underground marble quarry in the Apuan Alps (Italy) C. Vanneschi et al. 10.1016/j.cageo.2014.04.009
129. Use of LIDAR in landslide investigations: a review M. Jaboyedoff et al. 10.1007/s11069-010-9634-2
130. A new method for automated discontinuity trace mapping on rock mass 3D surface model X. Li et al. 10.1016/j.cageo.2015.12.010
131. Photogrammetry in Documentation and Ambient Vibration Test of Historical Masonry Minarets K. Hacıefendioğlu & E. Maraş 10.1007/s40799-016-0137-2
132. Historical accesses to UNESCO cultural heritages: engineering geology for the sustainable conservation of Petra Siq C. Margottini & D. Spizzichino 10.1007/s41062-017-0074-7
133. Numerical study on the failure evolution of rock slopes containing multi-flaws by strength-based fracture method L. Zhang et al. 10.1016/j.engfailanal.2023.107924
134. Direct Georeferencing UAV-SfM in High-Relief Topography: Accuracy Assessment and Alternative Ground Control Strategies along Steep Inaccessible Rock Slopes P. Nesbit et al. 10.3390/rs14030490
135. Gigapixel Imaging and Photogrammetry: Development of a New Long Range Remote Imaging Technique M. Lato et al. 10.3390/rs4103006
136. Terrestrial laser scanning for use in virtual outcrop geology S. Buckley et al. 10.1111/j.1477-9730.2010.00585.x
137. Rock bench: Establishing a common repository and standards for assessing rockmass characteristics using LiDAR and photogrammetry M. Lato et al. 10.1016/j.cageo.2012.06.014
138. Investigating the toppling failure of anti-dip rock slopes containing non-persistent cross-joints via a strength-based fracture method L. Zhang & S. Tang 10.1016/j.enggeo.2024.107491
139. Discontinuity Characterization of Rock Masses through Terrestrial Laser Scanner and Unmanned Aerial Vehicle Techniques Aimed at Slope Stability Assessment M. Pagano et al. 10.3390/app10082960
140. Runout analysis of a large rockfall in the Dolomites/Italian Alps using LIDAR derived particle sizes and shapes F. Haas et al. 10.1002/esp.3295
141. A 4D Filtering and Calibration Technique for Small-Scale Point Cloud Change Detection with a Terrestrial Laser Scanner R. Kromer et al. 10.3390/rs71013029
142. Estimation of the Mean Trace Length of Discontinuities in an Underground Drift Using Laser Scanning Point Cloud Data Y. Xiao et al. 10.3390/su142315650
143. Probabilistic assessment of rock slopes stability using the response surface approach – A case study H. Basahel & H. Mitri 10.1016/j.ijmst.2018.11.002
144. Geomechanical Characterization and Stability Analysis of the Bedrock Underlying the Costa Concordia Cruise Ship G. Dotta et al. 10.1007/s00603-017-1219-x
145. Low-Cost Sensor-Based and LoRaWAN Opportunities for Landslide Monitoring Systems on IoT Platform: A Review S. Bagwari et al. 10.1109/ACCESS.2021.3137841
146. From geotechnical analysis to quantification and modelling using LiDAR data: a study on rockfall in the Reintal catchment, Bavarian Alps, Germany T. Heckmann et al. 10.1002/esp.2250
147. Reconstruction of the history of the Palliser Rockslide based on 36Cl terrestrial cosmogenic nuclide dating and debris volume estimations M. Sturzenegger et al. 10.1007/s10346-014-0527-4
148. Application of combined terrestrial laser scanning and unmanned aerial vehicle digital photogrammetry method in high rock slope stability analysis: A case study A. Ismail et al. 10.1016/j.measurement.2022.111161
149. Stability analysis of a tunnel using LIDAR data and the keyblock method A. Menéndez-Díaz et al. 10.1007/s10064-015-0761-6